Netgear DG834 - Vista
All IDNet supplied Netgear routers come preconfigured for basic internet access. The following guide will help you should you ever need to reset your router to factory defaults or it looses its configuration.
What's in the box?
- NETGEAR DG834 - 4 port Ethernet router with built in ADSL modem
- Ethernet cable
- RJ11 cable
- Power adapter
- Micro filter
- Set up guide and other documentation
How to set it up
Ensure you have all the equipment and nothing is missing.
Connect one end of the Ethernet cable to the port on the back of the router and the other end into the corresponding port on your PC.
Take the RJ11 cable and plug it into the port on the back of the router and the other end into the DSL port on the micro filter.
Plug the micro filter into the telephone socket and finally plug the power adapter into the router and a suitable power supply.
You should see the lights on the front of the modem come on.
Next you you will need to open your browser e.g. Internet Explorer/Firefox, type in 'http://192.168.0.1' into the address bar and hit Enter. You should now be asked to login.
Enter admin in the User Name field and password in the Password field then click OK.
In the menu of the left side of the window click on Basic Settings, work through the page entering the following settings:
- Does your connection require a login?: Yes
- Encapsulation: PPPoA (PPP over ATM)
- Login: As provided to you by IDNet
- Password: As provided to you by IDNet
- Idle Timeout: 0
- Internet IP address: Get Dynamically from ISP
- Domain Name Server (DNS) address: Primary 212.69.36.3 Secondary 212.69.40.3
- NAT (Network Address Translation): Enable
Click Apply then go to ADSL Settings.
Enter the following settings:
- Multiplexing Method: VC-Based
- VPI:0
- VCI:38
Click Apply. You have now entered all the information you need to make a connection to the Internet. Click on Log Out at the bottom of the menu.
You may need to configure your PC, to do this go to Control Panel and click on Network Connections.
At the bottom of the window you will see Start Search, type in 'network and sharing' then hit Enter.
The Network and Sharing Centre will launch automatically, under Network you will see Local Area Connection, click on View Status.
You will now have a new window called Local Area Connection Status, click on 'Properties', you may be asked for permission to continue, click 'Continue'.
You should now see Local Area Connection Properties, click on 'Internet Protocol Version 4 (TCP/IPv4)' then click on 'Properties'.
Ensure that 'Obtain and IP address automatically' and 'Obtain DNS server address automatically' are selected then click OK.
You should now be able to access the Internet, if you have any difficulty why not visit our Support Guides for assistance with troubleshooting the issue, alternatively contact the Support Team.
Information on how to set up email accounts can be found on the Email Set Up section of the Support Guides.